Sunday, April 25, 2010

สรุปการตั้งค่า Receiver ของดาวเทียม

สรุป
- ชื่อของ ดาวเทียม และ องศา ไม่มีความสำคัญ ขอแค่ตั้งหน้าจานให้ถูกต้องลากสายจาก LNB มาที่ receiver ก็ใช้ได้แล้ว

- จุดที่สำคัญคือ การตั้งค่าหัว LNB โดยเลือกตั้งตามนี้
LNB C Band คือ 5150
LNB KU Band คือ 9750,10600
LNB KU UBC คือ 11300

- ตั้งค่า Transponder (TP) ที่จะให้ scan , receiver บางรุ่นสามารถที่จะ scan หาช่องให้จากทุก TP ได้เอง บางรุ่นต้องเพิ่มค่า TP เข้าไปเองก่อน แล้วจะ scan แค่ TP ที่อยู่ใน list เท่านั้น (ต้องระบุว่าเป็น H หรือ V ด้วย)

- receiver ที่รับ H จะต่อพ่วงกับ V ไม่ได้ ต้องแยกสาย H , V มาจาก LNB เลย เวลาซื้อ LNB ให้ซื้อแบบที่มีทั้ง H และ V

- ถ้ารู้ความถี่ช่องที่ต้องการ สามารถให้ scan เฉพาะความถี่นั้นได้ โดยใส่ค่า TP, H หรือ V, SR , FEC

- ทิศทางการหันหน้าจานดูจากเวปนี้ http://www.dishpointer.com/ จะง่ายที่สุด

Note
- บางเมนูไม่ขึ้นเป็นปุ่มให้กด แต่จริงๆแล้วสามารถได้เช่นการ scan ช่อง บางทีให้กดตรง SR หรือ TP ก็มี

Tuesday, April 20, 2010

Vmware Player with multiple network adpater

ถ้าเรามี network card หลายอัน default แล้ว vmware player จะเลือกให้เราเอง
สามารถเปลี่ยนแปลงได้โดยใช้ vmnetcfg.exe ซึ่งจะไม่ถูก install โดยอัตโนมัติ
จะต้อง extract ออกมาจากตัว installer เอง โดยใช้ option /e และจะอยู่ในไฟล์ network.cab อีกที
เสร็จแล้ว copy ไปใส่เอาไว้ใน folder ที่ได้ install vmware player เอาไว้ ก็จะใช้งานได้

Thursday, April 08, 2010

Dell Optiplex Light Code and Beep Code

Dell Technical Support



Optiplex, Latitude, Studio & Precision Standard Tier Main Line                       1800-0060-07
PowerEdge & PowerVault Main Line                                                              1800-0600-09
Thailand Toll-free (AIS & TOT Telco)                                                            1800-060-157
Thailand Toll-free(CAT, True & DTAC Telco)                                               001-800-601-5623
Thailand Customer Care Toll Free                                            1800-006-006 Press: 2 & Press: 5
Local Landline Call                                                  02-6707000 Press 2 & Press 1 Ext: 2133416




Technical Support จะถามอยู่ 3 คำถามคือ

1. ไฟ Power ติดสีอะไร และกระพริบหรือไม่
2. ไฟ Diagnostic Light ติดที่หมายเลขอะไรบ้าง
3. ได้ยินเสียง Beep ด้วยหรือเปล่า

System Lights

Your power button light and hard-drive light may indicate a computer problem.


Power Light

Problem Description

Suggested Resolution
Solid greenPower is on, and the computer is operating normally. On the desktop computer, a solid green light indicates a network connection.No corrective action is required.
Blinking greenThe computer is in a power-saving mode (Microsoft® Windows® XP).Press the power button, move the mouse, or press a key on the keyboard to wake the computer.
Blinks green several times and then turns offA configuration error exists.Check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights).
Solid yellowThe Dell Diagnostics is running a test, or a device on the system board may be faulty or incorrectly installed.If the Dell Diagnostics is running, allow the testing to complete.
If the computer does not boot, contact Dell for technical assistance (see Contacting Dell).
Blinking yellowA power supply or system board failure has occurred.See Power Problems.
Solid green and a beep code during POSTA problem was detected while the BIOS was executing.See Beep Codes for instructions on diagnosing the beep code. Also, check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights).
Solid green power light and no beep code and no video during POSTThe monitor or the graphics card may be faulty or incorrectly installed.Check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights).
See Video and Monitor Problems.
Solid green power light and no beep code but the computer locks up during POSTAn integrated system board device may be faulty.Check the diagnostic lights to see if the specific problem is identified (see Diagnostic Lights). If the problem is not identified, contact Dell for technical assistance (see Contacting Dell).


Diagnostic Lights


CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
To help you troubleshoot a problem, your computer has four lights labeled "1," "2," "3," and "4" on the front or back panel. The lights can be off or green. When the computer starts normally, the patterns or codes on the lights change as the boot process completes.
If the POST portion of system boot completes successfully, all four lights display solid green. If the computer malfunctions during the POST process, the pattern displayed on the LEDs may help identify where in the process the computer halted.
NOTE: The orientation of the diagnostic lights may vary dependent upon the computer type. The diagnostic lights can appear either vertical or horizontal.


Light Pattern

Problem Description

Suggested Resolution


The computer is in a normal "off" condition, or a possible pre-BIOS failure has occurred.
The diagnostic lights are not lit after the computer successfully boots to the operating system.
Plug the computer into a working electrical outlet and press the power button.


A possible BIOS failure has occurred; the computer is in the recovery mode.Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer.


A possible processor failure has occurred.Reinstall the processor and restart the computer.


Memory modules are detected, but a memory failure has occurred.
  • If you have one memory module installed, reinstall it and restart the computer. (see Memory for instructions on how to remove and install memory modules.)
  • If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error.
  • If available, install properly working memory of the same type into your computer.
  • If the problem persists, contact Dell (see Contacting Dell).


A possible graphics card failure has occurred.
  • If the computer has a graphics card, remove the card, reinstall it, and then restart the computer.
  • If the problem still exists, install a graphics card that you know works and restart the computer.
  • If the problem persists or the computer has integrated graphics, contact Dell (see Contacting Dell).


A possible floppy or hard drive failure has occurred.Reseat all power and data cables and restart the computer.


A possible USB failure has occurred.Reinstall all USB devices, check cable connections, and then restart the computer.


No memory modules are detected.
  • If you have one memory module installed, reinstall it and restart the computer. (see Memory for instructions on how to remove and install memory modules.)
  • If you have two or more memory modules installed, remove the modules, reinstall one module, and then restart the computer. If the computer starts normally, reinstall an additional module. Continue until you have identified a faulty module or reinstalled all modules without error.
  • If available, install properly working memory of the same type into your computer.
  • If the problem persists, contact Dell (see Contacting Dell).


Memory modules are detected, but a memory configuration or compatibility error exists.
  • Ensure that no special memory module/memory connector placement requirements exist (see Memory).
  • Verify that the memory modules that you are installing are compatible with your computer (see Memory).
  • If the problem persists, contact Dell (see Contacting Dell).


A failure has occurred.
This pattern also displays when you enter system setup (see Entering System Setup) and may not indicate a problem.
  • Ensure that the cables are properly connected to the system board from the hard drive, CD drive, and DVD drive.
  • Check the computer message that appears on your monitor screen.
  • If the problem persists, contact Dell (see Contacting Dell).


After POST is complete, all four diagnostic lights turn green briefly before turning off to indicate normal operating condition.None.


Beep Codes

Your computer might emit a series of beeps during start-up if the monitor cannot display errors or problems. This series of beeps, called a beep code, identifies a problem. One possible beep code (code 1-3-1) consists of one beep, a burst of three beeps, and then one beep. This beep code tells you that the computer encountered a memory problem.
If your computer beeps during start-up:
  1. Write down the beep code on the Diagnostics Checklist.

  2. Run the Dell Diagnostics to identify a more serious cause (see Dell Diagnostics).

  3. Contact Dell for technical assistance (see Contacting Dell).



Code

Cause
1-1-2Microprocessor register failure
1-1-3NVRAM read/write failure
1-1-4ROM BIOS checksum failure
1-2-1Programmable interval timer failure
1-2-2DMA initialization failure
1-2-3DMA page register read/write failure
1-3Video Memory test failure
1-3-1 through 2-4-4Memory not being properly identified or used
3-1-1Slave DMA register failure
3-1-2Master DMA register failure
3-1-3Master interrupt mask register failure
3-1-4Slave interrupt mask register failure
3-2-2Interrupt vector loading failure
3-2-4Keyboard Controller test failure
3-3-1NVRAM power loss
3-3-2Invalid NVRAM configuration
3-3-4Video Memory test failure
3-4-1Screen initialization failure
3-4-2Screen retrace failure
3-4-3Search for video ROM failure
4-2-1No timer tick
4-2-2Shutdown failure
4-2-3Gate A20 failure
4-2-4Unexpected interrupt in protected mode
4-3-1Memory failure above address 0FFFFh
4-3-3Timer-chip counter 2 failure
4-3-4Time-of-day clock stopped
4-4-1Serial or parallel port test failure
4-4-2Failure to decompress code to shadowed memory
4-4-3Math-coprocessor test failure
4-4-4Cache test failure

Tuesday, April 06, 2010

การใช้ excel vlookup


ข้อกำหนดของ vlookup (ไม่แน่ใจว่า excel version ใหม่แก้หรือยัง)
- ต้องมีการเรียงลำดับจากน้อยไปหามากเอาไว้ก่อน
- column ที่ใช้ค้นหาของ table array จะต้องเป็น column ที่อยู่ซ้ายมือสุดเสมอ

 =VLOOKUP(ค่าที่ต้องการค้นหา,ตารางข้อมูล,หมายเลขของ column ตารางข้อมูลที่ต้องการนำข้อมูลมาแสดงเริ่มตั้งแต่ซ้ายสุดคือ 1 ไปเรื่อยๆ,not_exact_match)

- not_exact_match ส่วนใหญ่จะใช้ FALSE หรือ 0 ซึ่งหมายถึงต้องการให้ค้นหาแบบ exact match
- ถ้าใช้เป็น TRUE จะหมายถึง approximate match หมายความว่าถ้าค้นหาไม่เจอ vlookup จะหาค่าที่มากที่สุดที่น้อยกว่าค่าที่ต้องการค้นหา (ไม่ค่อยได้ใช้ True)

http://www.techonthenet.com/excel/formulas/vlookup.php


สำหรับ Excel แล้ว False = 0 และ True = 1

การอ้างถึงข้ามไฟล์ข้าม sheet ใช้ [Book2]Sheet1!

การตรึงใช้ $ สามารถตรึงได้ทั้ง row และ column เช่น $A$1 หรือจะใช้ Defind Name ก็ได้สะดวกดี